Furnace, heat pump, AC & electrical — one licensed crew for the whole house, serving Greater Seattle since 2017.
Mon–Fri 8am–6pm(206) 427-8907
SPS Pro Services repairs furnaces, installs heat pumps and handles licensed electrical work — with upfront pricing before a single panel comes off.
Furnace out during a cold snap, tripped main panel, dead water heater — call any time and get a tech dispatched across Greater Seattle.
years keeping Seattle-area homes running — heating, cooling and electrical under one roof.
Ignition, blower and short-cycling fixes for gas & electric furnaces.
Tank & tankless — no hot water, leaks, pilot and element issues.
Central AC and mini-splits back online before the next heat dome.
Panels, circuits, outlets, lighting — licensed residential electrical.
Ductless & ducted systems sized for mild, damp Puget Sound winters.
Level 2 home chargers, permit and 240V circuit included.
King & Snohomish counties — most jobs reached within the hour.
If we quote it, that's the price. Flat written quotes before work starts — and if a repair isn't worth the money, we'll tell you straight.
Sergei PetrovFounder & Lead Technician · SPS Pro ServicesDescribe the problem — we'll tell you what it usually costs before we roll a truck.
A licensed tech confirms the fault and hands you a written, no-surprises quote.
Trucks stocked with common parts. Work backed by a workmanship warranty.
Heating, cooling, electrical and water heaters overlap constantly in a real house — a failing blower trips a breaker, a heat pump needs a new circuit, a water heater swap needs both gas and code work. We staff all four trades so one visit actually closes the ticket.
Most furnaces we open up around Puget Sound are 80% or 95% AFUE gas units between 12 and 25 years old. We repair igniters, flame sensors, blower motors and control boards the same visit when parts allow — and when a heat exchanger is cracked past the point of economic repair, you get the repair-vs-replace math in writing, not a sales pitch.
The Seattle area is heat-pump country: winters rarely dip below the mid-20s, so a properly sized cold-climate heat pump heats all winter and covers the hot stretches that keep coming back every summer. We size systems with a Manual J calculation — not by square footage alone — and install both ducted and ductless mini-split setups.
A lot of King and Snohomish county housing stock predates modern electrical loads — 100-amp panels, two-prong outlets, sometimes original wiring in pre-war homes. Our licensed electricians handle panel upgrades, EV charger circuits, troubleshooting and code corrections, with permits and inspections included in the quote.
Tank and tankless, gas and electric — repairs when an element, thermostat or gas valve fails, and full code-compliant replacements when the tank itself goes. Washington requires seismic strapping and a proper expansion setup on new installs; both are part of our standard scope, not an add-on.
Marine air keeps winters gentle but wet, which is why so many of our calls trace back to moisture: corroded flame sensors, rusted burner assemblies, condensation working on ductwork in vented crawlspaces. It's also why heat pumps make more sense here than almost anywhere in the country — the compressor rarely fights truly cold air, so it runs efficiently nearly all season.
Craftsman bungalows and mid-century ramblers were built for a fraction of today's electrical load. We routinely find 100-amp panels feeding a modern kitchen, a heat pump and an EV charger — or aluminum branch circuits and two-prong outlets in homes that have changed hands five times. Checking panel capacity before quoting new equipment is standard for us, so the install quote doesn't grow after the fact.
After the 2021 heat dome, cooling went from luxury to checklist item across King and Snohomish counties. The practical answer for most homes isn't a separate AC — it's a heat pump that replaces an aging furnace and handles both seasons, often with utility rebates and federal tax credits taking a real bite out of the price.
Verbatim from our Google Business Profile — rated5.0 across 9 reviews.
SPS Pro was very prompt to respond to my furnace repair request, he did a thorough job in diagnosing the issue and even fixed it the same day! Thank you so much Vlad!
These guys are professionals! We called on a Friday for a dishwasher repair, gave them some pictures and details, they preemptively ordered the part they suspected was needed and had it on hand when arriving for the repair on Monday.
This is the best company we've ever used. He is awesome. Showed up on time and did exactly what I needed. I would recommend him to anyone who needs appliance repair or for that matter anything fixed.
Costs, failure patterns and repair-vs-replace math from real service calls — the same answers we give on the phone, written down.
Learn the warning signs of a failing AC compressor, how to test it, and realistic Seattle-area repair or replacement costs.
Where WA law requires CO alarms, how long they last, and what NEC and L&I rules mean for hardwired units. A field guide from a Seattle electrician.
Real kWh and dollar numbers for heat pump electricity use in Seattle, King and Snohomish County, with PSE and SnoPUD rate comparisons.
Real questions from real service calls across King and Snohomish counties.
Most furnace repairs in the Seattle metro land between $189 and $950 depending on the part — igniters and flame sensors sit at the low end, blower motors and control boards at the top. The diagnostic is credited toward the repair, so you never pay twice, and you get a flat written quote before any work starts.
In most Puget Sound homes — yes, when the furnace is near end of life. Our mild winters are ideal for heat pumps: you get efficient heat plus air conditioning for the increasingly hot summers, and utility rebates plus federal tax credits can offset a meaningful share of the installed cost (systems from $6,500). If your furnace is under 10 years old and healthy, we'll tell you to keep it.
Yes — a Level 2 charger runs on a dedicated 240V circuit, and Washington requires an electrical permit and inspection for that work. We pull the permit, run the circuit, mount the charger and schedule the inspection as part of the job (from $899). If your panel is close to capacity, we'll assess whether a load-management device can avoid a full panel upgrade.
Treat it as a warning, not a quirk. A breaker that trips when the furnace or heat pump starts usually points to a failing motor drawing excess current, a loose connection, or an undersized or aging breaker — all of which can overheat wiring. Stop resetting it repeatedly and call us at (206) 427-8907; because we're both HVAC techs and licensed electricians, one visit covers both sides of the problem.
We dispatch from Lake Forest Park and cover 37 cities across King and Snohomish counties — Seattle, Bellevue, Everett, Kirkland, Renton, Lynnwood, Shoreline and the communities around them. Most addresses are within a 30–45 minute drive of our base, which is what makes same-day service realistic. See the full list on our Areas We Serve page.
Yes — SPS Pro Services is licensed, bonded and insured in Washington State, and electrical work is performed by licensed electricians with permits pulled and inspections scheduled as part of the job. If a job legally requires a permit — panel upgrades, new circuits, water heater replacements, EV chargers — it is included in the written quote, never skipped to make a price look lower.
For no-heat, no-power and active-leak emergencies we run a 24/7 line and dispatch the same day, including evenings and weekends. For scheduled work, most visits book within one to two business days. Trucks carry the common failure parts — igniters, flame sensors, capacitors, thermostats, standard breakers — so the majority of repairs finish in a single visit.
Mon–Fri 8am–6pm for scheduled work · 24/7 for emergencies · Greater Seattle