Your furnace or heat pump is 12-15 years old and repairs are getting frequent
Heat Pumps · Everett, WA
Heat Pump Installation in Everett, WA
Most heat pump installations in Everett run $6,500-$15,500 installed, depending on system size and ductwork condition. SPS Pro Services has installed systems throughout Snohomish County since 2017, and Everett homeowners typically get an on-site quote scheduled within 2-3 business days of calling.
Typical cost$6,500–$15,500
WarrantyWorkmanship warranty
AvailabilitySame-week visits
HoursMon–Fri 8am–6pm
What sets this page apart is what happens after you book: we tell you exactly what to expect on install day, not just a price. Our crews give a 2-hour arrival window, call 20-30 minutes out, and walk the homeowner through the equipment layout before any tools come out. Most single-system installs finish in one day, with a final walkthrough covering thermostat setup and airflow checks.
Local knowledge
What's different about heat pump installation in Everett
Here is what our techs actually see on Everett jobs, season after season.
Everett's older housing stock, especially homes built before 1960 near Riverside and Bayside, often has undersized or leaky ductwork that needs sealing before a heat pump can hit its rated efficiency.
Snohomish County PUD offers rebates for qualifying ductless and ducted heat pump installs, and we handle the rebate paperwork as part of the job in Everett.
Everett's marine climate means mild winters but regular damp cold snaps off Possession Sound, so we size systems for steady low-temperature performance rather than just peak summer cooling.
Symptoms we see daily
Signs you need heat pump installation in Everett
You have no central air and summers in your home are uncomfortable
You're heating with electric baseboards and utility bills spike every winter
Rooms heat or cool unevenly no matter how you adjust the thermostat
You're planning a remodel or addition and need new HVAC capacity
No surprises
How a Everett heat pump installation visit works
1
Call and initial screening
You call (206) 427-8907, describe your current system and square footage, and we schedule a home visit, usually within 2-3 business days for Everett addresses.
2
On-site assessment
A technician arrives within the agreed window, inspects your ductwork, electrical panel capacity, and outdoor unit placement options, then gives you a firm quote before leaving.
3
Scheduling the install
Once you approve the quote, we book an install date and confirm what to expect: arrival time, expected duration, and any prep like clearing access to the attic or crawlspace.
4
Installation day
Crews arrive within a 2-hour window, protect floors and walls, install the indoor and outdoor units, and test refrigerant lines and electrical connections before startup.
5
Walkthrough and closeout
We walk you through thermostat programming, filter locations, and basic maintenance, then leave you with paperwork for any PUD rebate you're eligible for.
Flat-rate pricing
Heat Pump Installation in Everett — what it costs
Conservative ranges for the Seattle metro. Your written quote is exact before work begins.
| Job | Typical price |
|---|---|
| In-home estimateExact flat quote for your home | Free |
| Standard heat pump installationTypical single-system job | $6,500–$9,500 |
| Mid-range heat pump installationHigher-capacity or multi-zone equipment | $9,500–$12,500 |
| Complex heat pump installationPremium equipment or difficult access | $12,500–$15,500 |
Prices reviewed by Sergei Petrov · July 2026. Parts availability can shift ranges — the quote you sign is final.
24/7 Emergency Line
Emergency dispatchNo heat at 11pm? We pick up.
Office hours are Mon–Fri, but the emergency line never closes. Call any hour and we dispatch a licensed tech across Greater Seattle.
Straight answers
Heat Pump Installation in Everett — FAQ
How fast can you install a heat pump in Everett?
Once you approve a quote, most single-system installs in Everett are scheduled within one to two weeks and completed in a single day. If you're replacing a failed furnace during cold weather, we prioritize scheduling and can often move faster.
Will my Everett home need duct repairs before a heat pump install?
Homes in older Everett neighborhoods, particularly near downtown and North Everett, sometimes have ductwork that's undersized or leaking at the seams. We check this during the on-site visit and include any needed sealing or resizing in your quote, not as a surprise later.
Do you help with Snohomish PUD rebates?
Yes. Snohomish County PUD offers incentives for qualifying heat pump installations, and we handle the rebate submission paperwork as part of the Everett install process so you're not tracking down forms after the fact.
What should I expect on the day of the install?
You'll get a 2-hour arrival window and a call 20-30 minutes before the crew shows up. Most Everett installs take one day, and we walk you through the thermostat and system basics before we leave.
Founder & Lead HVAC Technician, SPS Pro Services
EPA Section 608 UniversalNATE Core Certified14+ years in the trade
Reviews the pricing and service guidance on this page against SPS Pro Services's actual job records in Everett and across the Seattle metro.
Prices reviewed July 2026
Also in Everett
Other services our crew handles on the same routes.
Need heat pump installation in Everett?
Call (206) 427-8907 to schedule your Everett heat pump assessment and get a firm quote before any work begins.