Furnace is 15 years or older and needs frequent repairs
Heating · Renton, WA
Furnace Installation in Renton, WA
Furnace installation in Renton typically runs $4,800 to $9,800 installed, depending on furnace size and ductwork condition. SPS Pro Services dispatches crews from our Seattle base and can usually get a technician to your Renton home within 1-2 business days for a quote, with install scheduled the same week.
Typical cost$4,800–$9,800
WarrantyWorkmanship warranty
AvailabilitySame-week visits
HoursMon–Fri 8am–6pm
What sets this page apart is what happens after you call. Renton homeowners often ask how fast we can actually show up and what the install day itself looks like. We give you a firm arrival window (not an all-day guess), confirm it by text the morning of, and walk you through the full scope before any equipment gets uncrated - so there are no surprises about timeline or dust in your living room.
Local knowledge
What's different about furnace installation in Renton
Here is what our techs actually see on Renton jobs, season after season.
Many Renton neighborhoods like Kennydale and Benson Hill have homes built in the 1950s-60s with original ductwork sized for smaller, older furnaces - a proper load calculation matters more than the sticker BTU rating.
Renton winters bring damp cold off Lake Washington and the Cedar River valley, so furnaces here run longer daily cycles than in drier inland areas, which affects which efficiency tier makes sense.
PSE serves electric and gas in most of Renton, and rebate paperwork for higher-efficiency furnaces has to be filed correctly at install time or homeowners miss the credit.
Symptoms we see daily
Signs you need furnace installation in Renton
Uneven heating between rooms or floors
Energy bills rising without a change in usage
Furnace short-cycles, turning on and off repeatedly
Unusual noises, a burning smell, or a yellow pilot flame
No surprises
How a Renton furnace installation visit works
1
Same-week phone or online scheduling
Call (206) 427-8907 or book online; most Renton addresses get an appointment within 1-2 business days, and we text a 2-hour arrival window the morning of.
2
On-site assessment
A technician measures your home's square footage, checks existing ductwork and venting, and inspects your electrical panel and gas line before recommending a furnace size.
3
Written estimate on the spot
You get a fixed price before we leave, broken down by equipment, labor, and any duct or venting work, with no changes once the job starts unless you approve them.
4
Install day walkthrough
We confirm start time, cover floors and walkways, remove the old furnace, and typically complete a standard swap in one day, testing airflow and thermostat function before we leave.
5
Final check and permit close-out
We pull the required Renton permit, schedule the inspection, and follow up once it's signed off, plus we cover labor for one year if anything needs adjustment.
Flat-rate pricing
Furnace Installation in Renton — what it costs
Conservative ranges for the Seattle metro. Your written quote is exact before work begins.
| Job | Typical price |
|---|---|
| In-home estimateExact flat quote for your home | Free |
| Standard furnace installationTypical single-system job | $4,800–$6,470 |
| Mid-range furnace installationHigher-capacity or multi-zone equipment | $6,470–$8,130 |
| Complex furnace installationPremium equipment or difficult access | $8,130–$9,800 |
Prices reviewed by Sergei Petrov · July 2026. Parts availability can shift ranges — the quote you sign is final.
24/7 Emergency Line
Emergency dispatchNo heat at 11pm? We pick up.
Office hours are Mon–Fri, but the emergency line never closes. Call any hour and we dispatch a licensed tech across Greater Seattle.
Straight answers
Furnace Installation in Renton — FAQ
How fast can someone get to my house in Renton?
Most Renton requests get a technician on-site within 1-2 business days for the initial assessment. If your furnace has failed completely, tell us when you call and we prioritize same-day or next-day emergency visits within that window.
What should I expect on install day?
Expect a confirmed arrival window sent by text that morning, floor protection through your home, removal of the old unit, and a single-day install for most standard swaps. We test heat output and thermostat response before leaving and walk you through the new controls.
Do older Renton homes need duct changes for a new furnace?
Often yes. Homes in areas like Talbot Hill or Highlands built before 1970 sometimes have undersized return ducts. Our on-site assessment checks this before quoting, so the estimate you get reflects any duct modification, not just the furnace itself.
Is permitting handled for me in Renton?
Yes, we pull the mechanical permit required by the City of Renton for furnace replacement and schedule the inspection as part of the job. This is included in the estimate, not an add-on cost after install.
Founder & Lead HVAC Technician, SPS Pro Services
EPA Section 608 UniversalNATE Core Certified14+ years in the trade
Reviews the pricing and service guidance on this page against SPS Pro Services's actual job records in Renton and across the Seattle metro.
Prices reviewed July 2026
Also in Renton
Other services our crew handles on the same routes.
Need furnace installation in Renton?
Call (206) 427-8907 to get a Renton furnace installation quote scheduled within 1-2 business days.