Water heater is 10 to 12 years old or older and showing rust-colored water
Water Heaters · Redmond, WA
Water Heater Installation in Redmond, WA
Most water heater installations in Redmond run $1,650 to $4,800 installed, depending on tank size, fuel type, and whether you switch to a heat pump model. SPS Pro Services installs tank and tankless units throughout Redmond, from Education Hill to Bear Creek, with next-day scheduling available most weeks.
Typical cost$1,650–$4,800
WarrantyWorkmanship warranty
AvailabilitySame-week visits
HoursMon–Fri 8am–6pm
Redmond homeowners get electricity and natural gas from Puget Sound Energy, and PSE currently offers rebates on qualifying heat pump water heaters that can offset a chunk of the upfront cost. A heat pump unit costs more to install but typically cuts water heating energy use significantly compared to standard electric resistance tanks, which matters given how many Redmond homes run electric-only systems. We'll walk you through the real numbers before you decide.
Local knowledge
What's different about water heater installation in Redmond
A few things about working in Redmond shape how we quote and schedule this job.
Many Redmond neighborhoods like Education Hill and Grasslawn were built in the 1980s-2000s with 40-50 gallon electric tanks now reaching end of life, and swapping to a heat pump water heater often qualifies for a PSE rebate that lowers the installed cost.
Newer construction near Redmond Ridge and Trilogy often has tankless-ready gas lines already roughed in, which can reduce labor time and bring installs toward the lower end of the price range.
Redmond's tighter garages and utility closets in townhome developments near downtown sometimes require a smaller-footprint tankless or compact tank unit, which we account for during the in-home estimate.
Symptoms we see daily
Signs you need water heater installation in Redmond
Tank is leaking or you notice pooling water at the base
Hot water runs out faster than it used to or takes longer to reheat between uses
Popping, rumbling, or knocking sounds coming from sediment buildup inside the tank
Pilot light won't stay lit, or an electric unit keeps tripping the breaker
No surprises
How a Redmond water heater installation visit works
1
Phone or on-site assessment
We ask about your current tank size, fuel type (electric or PSE natural gas), household hot water usage, and whether you're interested in a rebate-eligible heat pump model.
2
Written estimate with rebate check
You get a fixed price within the $1,650-$4,800 range and we flag any current PSE rebate you may qualify for on heat pump or high-efficiency units.
3
Old unit removal and disposal
We disconnect and haul away your existing water heater, checking for corrosion or leaks that may point to related plumbing issues.
4
Installation and code compliance
We install the new unit to current Washington State plumbing and electrical code, including proper venting for gas models and expansion tank requirements where needed.
5
Testing and rebate paperwork
We test water temperature, pressure, and any leak points, then provide documentation you'll need if you're filing for a PSE rebate on your new unit.
Flat-rate pricing
Water Heater Installation in Redmond — what it costs
Conservative ranges for the Seattle metro. Your written quote is exact before work begins.
| Job | Typical price |
|---|---|
| In-home estimateExact flat quote for your home | Free |
| Standard water heater installationTypical single-system job | $1,650–$2,700 |
| Mid-range water heater installationHigher-capacity or multi-zone equipment | $2,700–$3,750 |
| Complex water heater installationPremium equipment or difficult access | $3,750–$4,800 |
Prices reviewed by Sergei Petrov · July 2026. Parts availability can shift ranges — the quote you sign is final.
24/7 Emergency Line
Emergency dispatchNo hot water at 11pm? We pick up.
Office hours are Mon–Fri, but the emergency line never closes. Call any hour and we dispatch a licensed tech across Greater Seattle.
Straight answers
Water Heater Installation in Redmond — FAQ
Does PSE offer rebates for water heaters in Redmond?
Puget Sound Energy periodically offers rebates for qualifying heat pump water heaters installed in its service area, which includes all of Redmond. Rebate amounts and eligibility change, so we check current offers at the time of your estimate and help you understand what paperwork is needed to claim one.
Is a heat pump water heater worth it for a Redmond home?
It depends on your household's hot water use and current fuel type. Heat pump units cost more upfront but use less electricity than standard resistance tanks, which can lower monthly operating costs over time, especially relevant since Redmond runs on PSE electric rates rather than a lower-cost public utility.
How fast can you install a water heater in Redmond?
For straightforward tank replacements in Redmond, we can often schedule installation within a few days of your estimate. Tankless conversions or units requiring new gas or electrical work may take a bit longer to coordinate permits and parts.
Do you serve neighborhoods outside downtown Redmond?
Yes, we install water heaters throughout Redmond including Education Hill, Grasslawn, Bear Creek, and Redmond Ridge, as well as nearby Kirkland, Bellevue, Sammamish, and Issaquah.
Founder & Lead HVAC Technician, SPS Pro Services
EPA Section 608 UniversalNATE Core Certified14+ years in the trade
Reviews the pricing and service guidance on this page against SPS Pro Services's actual job records in Redmond and across the Seattle metro.
Prices reviewed July 2026
Also in Redmond
Other services our crew handles on the same routes.
Need water heater installation in Redmond?
Call (206) 427-8907 to get a fixed water heater installation quote for your Redmond home, including any current PSE rebate options.