Outdoor unit runs but no warm air comes from the vents or indoor head
Heat Pumps · Kent, WA
Heat Pump Repair in Kent, WA
Most heat pump repairs in Kent run between $250 and $1,800, depending on the failed part and your system's age. SPS Pro Services dispatches technicians from our Seattle base to Kent addresses, typically arriving within the same day or next business day during 8am to 6pm hours.
Typical cost$250–$1,800
WarrantyWorkmanship warranty
AvailabilitySame-week visits
HoursMon–Fri 8am–6pm
When you call about a Kent heat pump that's blowing warm air or short-cycling, we ask a few diagnostic questions up front so the technician arrives with the right parts already on the truck. Most Kent appointments get booked within 24 to 48 hours, and on visit day you'll get a call or text when the tech is 20 to 30 minutes out. Expect a full system check, an upfront repair quote before any work starts, and a plain explanation of what failed and why.
Local knowledge
What's different about heat pump repair in Kent
Here is what our techs actually see on Kent jobs, season after season.
Kent mixes older homes in the East Hill and West Hill neighborhoods, many built in the 1970s and 80s with original ductwork, alongside newer construction near Kentridge and Lake Meridian, so heat pump sizing and line sets vary block to block.
Puget Sound Energy provides both electric and gas service in Kent, and heat pump compressors on older PSE-connected systems tend to strain hardest during cold snaps when temperatures drop into the 20s.
Kent's location in the Green River Valley traps more fog and standing moisture than the surrounding hills, which speeds up corrosion on outdoor coils and condensate lines if heat pumps aren't checked yearly.
Symptoms we see daily
Signs you need heat pump repair in Kent
System is stuck in defrost mode or ices over repeatedly
Short cycling, or the unit turns on and off every few minutes
Breaker trips when the heat pump tries to start
Loud grinding, clicking, or buzzing from the outdoor condenser
No surprises
How a Kent heat pump repair visit works
1
Call and describe the problem
Tell us what the heat pump is doing (no heat, ice buildup, strange noise, running constantly) so we can prep the right parts before the truck leaves.
2
Get a scheduling window
We give you a same-day or next-business-day appointment window for your Kent address and confirm it by phone or text.
3
Arrival and on-site diagnostic
The technician calls when they're 20 to 30 minutes out, then runs a full diagnostic on refrigerant levels, electrical components, and airflow.
4
Upfront repair quote
You get a flat quote for the repair before any work begins, based on the $250 to $1,800 range depending on parts and labor needed.
5
Repair, test, and walkthrough
We complete the repair, test the system through a full heating and cooling cycle, and walk you through what was fixed and any maintenance tips for your unit.
Flat-rate pricing
Heat Pump Repair in Kent — what it costs
Conservative ranges for the Seattle metro. Your written quote is exact before work begins.
| Job | Typical price |
|---|---|
| Diagnostic / service callCredited toward the work we do | $250 |
| Minor heat pump repairSingle small component or adjustment | $250–$770 |
| Typical heat pump repairThe most common jobs we see | $770–$1,280 |
| Major heat pump repairBig-ticket parts and labor | $1,280–$1,800 |
Prices reviewed by Sergei Petrov · July 2026. Parts availability can shift ranges — the quote you sign is final.
24/7 Emergency Line
Emergency dispatchNo heat at 11pm? We pick up.
Office hours are Mon–Fri, but the emergency line never closes. Call any hour and we dispatch a licensed tech across Greater Seattle.
Straight answers
Heat Pump Repair in Kent — FAQ
How fast can you get a technician to my Kent home?
Most Kent calls get scheduled within 24 to 48 hours, and many same-day slots are available if you call before early afternoon. We dispatch from our Seattle base, so drive time to Kent, East Hill, or West Hill is usually short.
What should I expect on the day of the repair visit?
You'll get a confirmed arrival window and a heads-up call or text when the technician is 20 to 30 minutes out. They'll run diagnostics, give you a firm price before starting work, and explain the issue in plain terms once the repair is done.
Do you work on heat pumps in older Kent homes with original ductwork?
Yes, many East Hill and West Hill homes from the 1970s and 80s still have original ductwork, and we regularly diagnose airflow and static pressure issues tied to that older setup alongside the heat pump repair itself.
Why does my heat pump struggle more during Kent's foggy, damp mornings?
The Green River Valley holds more moisture than surrounding areas, and that extra humidity can lead to faster coil corrosion or condensate line clogs. If your unit is icing up on foggy mornings, that's often the first sign worth having checked.
Founder & Lead HVAC Technician, SPS Pro Services
EPA Section 608 UniversalNATE Core Certified14+ years in the trade
Reviews the pricing and service guidance on this page against SPS Pro Services's actual job records in Kent and across the Seattle metro.
Prices reviewed July 2026
Also in Kent
Other services our crew handles on the same routes.
Need heat pump repair in Kent?
Call (206) 427-8907 to get a Kent heat pump repair scheduled, often within the same or next business day.