Furnace blows cold air or won't turn on at all
Heating · Edmonds, WA
Furnace Repair in Edmonds, WA
Furnace repair in Edmonds typically runs $189 to $950 depending on the part and system age. SPS Pro Services sends licensed techs to Edmonds homes for same-day and next-day appointments, Monday through Friday, 8am to 6pm.
Typical cost$189–$950
WarrantyWorkmanship warranty
AvailabilitySame-week visits
HoursMon–Fri 8am–6pm
Edmonds has a mix of housing stock that shapes what we see on service calls: waterfront and Bowl-area homes from the 1950s-70s still running original ductwork, and hillside neighborhoods with 1990s-2000s builds where the original furnace is now aging out. We regularly find cracked heat exchangers and failed ignitors in units 18+ years old, plus flue and vent corrosion tied to the salt air near the Sound. Knowing which failure pattern matches your home's age and location speeds up diagnosis.
Local knowledge
What's different about furnace repair in Edmonds
Every area we serve is different — in Edmonds, these three factors matter most.
Homes within a mile of the waterfront (Edmonds Bowl, Meadowdale) see faster corrosion on furnace flue pipes and control boards from salt-laden air, even though the unit sits indoors.
PSE supplies natural gas to most Edmonds neighborhoods, and we routinely check gas valve and pressure regulator function on older furnaces installed before 2000 as part of any no-heat call.
Snohomish PUD electric service means blower motor and control board failures during winter cold snaps often trace back to voltage fluctuations rather than the furnace itself, something our techs test for on site.
Symptoms we see daily
Signs you need furnace repair in Edmonds
Short cycling — turns on and off every few minutes
Loud banging, screeching, or rattling from the unit
Thermostat set correctly but rooms stay cold
Yellow or flickering flame instead of steady blue
No surprises
How a Edmonds furnace repair visit works
1
Phone diagnosis
Call (206) 427-8907 and describe the symptoms, no heat, short cycling, strange noise, so we can bring the right parts to your Edmonds address on the first visit.
2
On-site inspection
The technician checks the heat exchanger, ignitor, flame sensor, gas valve, and blower motor, and tests electrical connections for corrosion or loose wiring common in older Edmonds homes.
3
Upfront estimate
Before any work starts, you get a written price within the $189-$950 range based on the actual part needed, not a guess over the phone.
4
Repair completion
Most repairs, including ignitor, flame sensor, capacitor, or blower motor replacement, are finished same-day so your heat is back on before the visit ends.
5
System check
The tech confirms proper airflow, cycle timing, and carbon monoxide safety readings before leaving, and flags any parts nearing end of life for future planning.
Flat-rate pricing
Furnace Repair in Edmonds — what it costs
Conservative ranges for the Seattle metro. Your written quote is exact before work begins.
| Job | Typical price |
|---|---|
| Diagnostic / service callCredited toward the work we do | $189 |
| Minor furnace repairSingle small component or adjustment | $189–$440 |
| Typical furnace repairThe most common jobs we see | $440–$700 |
| Major furnace repairBig-ticket parts and labor | $700–$950 |
Prices reviewed by Sergei Petrov · July 2026. Parts availability can shift ranges — the quote you sign is final.
24/7 Emergency Line
Emergency dispatchNo heat at 11pm? We pick up.
Office hours are Mon–Fri, but the emergency line never closes. Call any hour and we dispatch a licensed tech across Greater Seattle.
Straight answers
Furnace Repair in Edmonds — FAQ
Why does my furnace in Edmonds keep shutting off after a few minutes?
Short cycling is one of the most common calls we get in Edmonds, often from a dirty flame sensor or a cracked heat exchanger triggering the limit switch. Homes with furnaces installed before the mid-2000s are more likely to have this issue simply from age and accumulated soot.
Do you work on furnaces near the Edmonds waterfront?
Yes, we service homes throughout the Edmonds Bowl and Meadowdale area. Salt air exposure accelerates corrosion on flue venting and control board contacts, so we inspect those parts closely on any repair call in these neighborhoods.
How fast can you get to my house in Edmonds?
Most Edmonds calls get same-day or next-day service, Monday through Friday between 8am and 6pm. Call (206) 427-8907 and we will give you a realistic arrival window based on the day's schedule.
My gas furnace won't ignite, is that a PSE gas supply issue?
Usually not. PSE supply outages are rare, and most no-ignition calls in Edmonds trace back to a failed ignitor, dirty flame sensor, or a tripped gas valve safety switch. Our techs test the gas supply first to rule it out, then move to the furnace components.
Founder & Lead HVAC Technician, SPS Pro Services
EPA Section 608 UniversalNATE Core Certified14+ years in the trade
Reviews the pricing and service guidance on this page against SPS Pro Services's actual job records in Edmonds and across the Seattle metro.
Prices reviewed July 2026
Also in Edmonds
Other services our crew handles on the same routes.
Need furnace repair in Edmonds?
Heat down in Edmonds? Call (206) 427-8907 for same-day furnace repair, Monday through Friday 8am to 6pm.